Exposure Setting Device:
The 120 roll film allows 6×6 (2.1/4″ x 2.1/4″) exposures. Twenty-four exposures can be obtained on 220 roll film. Picture (A) shows lever position when using 220 roll film. Keep pressing switch lever lock button and move lever until indicator arrow points to “12″ mark. After the 12th exposure the film advance crank will wind remaining film continuously onto take-up spool with no resistance. Picture (B) shows lever position when using 220 roll film. Switch lever lock button should be also pressed to move lever until arrow points to “24″ mark. In this way the film winder crank will stop at every number exposure until 24 before becoming “free”, allowing the remaining film to be wound up on roll.